• Categories:Industry news
• Author:
• Origin:
• Time of issue:2023-09-20 18:31
• Views:

(Summary description)Many people do not pay attention to the relevant knowledge of how to use pneumatic tools correctly, which leads to problems in use, especially reliability issues in life. This is what we don't want to see. So it is necessary for us to popularize the basic knowledge of using pneumatic tools. 1. The reaction force torque during the use of pneumatic tools. Some pneumatic tools may generate reaction force torque during normal use, causing the operator's body to be in a tense state, affecting body balance, and possibly pinching fingers. Special care should be taken when using multi axis nut locking equipment, screwdrivers, ratchet wrenches, bevel wrenches, rotors, tapping machines, pipe beveling machines, and other equipment. Operators should be cautious and take preventive measures against adverse reaction forces and torques. 2. When using pneumatic tools, it is necessary to choose an air compressor according to actual needs. The correct selection of air pressure is relatively simple, generally ranging from 8 atmospheres to high pressure such as 12 atmospheres (175Psi). If there are no special requirements, 8 atmospheres is generally sufficient The air flow rate of an air compressor is determined by its power This is generally sufficient for supplying a single tool. Before using pneumatic tools in a reliable and standardized manner, please read this manual thoroughly. Only after fully understanding the content can you use pneumatic tools in the workplace and strictly follow its contents. In short, during use, it is necessary to follow the operating steps described in the user manual. Do not use pneumatic tools with high loads and do not exceed the operating pressure. At the same time, frequently operating pneumatic tools in environments exceeding the operating pressure will greatly reduce the service life of the tool itself. When replacing tools or accessories frequently, please remove the pneumatic tool from the air source first. Wear goggles, earplugs, and masks as much as possible during operation to maintain oneself. Do not wear loose clothing, scarves, ties, or jewelry during operation to avoid being caught up by moving or rotating parts and causing danger. When connecting pneumatic tools to high-pressure gas sources, do not press the trigger unless in use. Always ensure the condition of spare parts, loose parts can cause serious danger. When replacing worn parts, please use specialized parts. Do not use compressed air tubes that are damaged or impacted. Do not point tools at yourself or others. Before use, check if there are any fragile or damaged parts in the air compression tube. If any of the above conditions are found, please update immediately to maintain the locking of all nuts and screws, and ensure that all equipment is in a reliable state.